Software Development
For software development for communication with receivers, USB dongles and magnetic antennas attached to the windowsill are the most convenient options.
Dongles are available for all receivers:
- ELT0084 - NEO-M8N receiver
- ELT0085 - NEO-M8T receiver
- ELT0103 - NEO-M9N receiver
- ELT0164 - NEO-M9V ADR+UDR receiver
- ELT0095 - ZED-F9T-00B receiver + second SMA connector for 1PPS output
- ELT0110 - ZED-F9P receiver + second SMA connector for 1PPS output
- ELT0111 - ZED-F9H receiver + second SMA connector for 1PPS output
- ELT0147 - ZED-F9T-10B receiver + second SMA connector for 1PPS output
For the ELT0147 receiver with ZED-F9T-10B, the best antenna choice is the ELT0140 patch antenna with a 5-meter cable. For all other dongles (which operate in the L1 or L1/L2b range), the recommended antenna is the ELT0012 patch antenna with a 5-meter cable.
Prototyping and Training
For training and rapid prototyping, smart antennas are the most suitable. They can be attached using either a magnetic mount or double-sided tape. There are two options for smart antennas:
First option with USB interface:
- ELT0155 - NEO-M9N receiver, black antenna
- ELT0155W - NEO-M9N receiver, white antenna
- ELT0156 - ZED-F9P receiver, black antenna
- ELT0156W - ZED-F9P receiver, white antenna
Second option with UART or SPI interface (determined by jumper on the board):
RTKLIB
For experiments with RTKLIB, there are many boards based on the NEO-M8T receiver. The best one (and the most expensive) is ELT0055 with a classic Tallysman antenna. The cheapest option is ELT0080. There are also options in between, such as ELT0070, ELT0046, and ELT0062.
© Eltehs SIA 2024


