These are several unique Smart antennas for specific cases.
Incase 32x28
This board is for Stratux ADS-B. Although a ground plane is recommended (70x70 mm), only this format is suitable for Stratux ADS-B. A passive patch antenna TAOGLAS CGGBP.25.4.A.02 is used as an antenna element. The interface is USB type A only. The received frequencies are L1, G1, B1I. The weight is 16 grams.
ELT0114 — NEO-M9N receiver
ELT0115 — NEO-M8N receiver
ELT0166 — NEO-M9V ADR+UDR receiver
Incase 30x16
This is a very lightweight board for applications where weight is critical. A ground plane is recommended (50x50 mm) but would increase the weight. The antenna itself is built into the SAM family receiver. The interface is a 6-pin JST SH connector with power, UART at TTL levels, and I2C contacts. The weight is 7.5 grams.
ELT0136 — SAM-M8Q receiver
ELT0169 — SAM-M10Q receiver
Incase 32x14
Another very lightweight board for applications where weight is crucial, and everything else is not important. If you need some quality, consider heavier boards. An active patch antenna TAOGLAS AP.12F is used as the antenna element. The interface is UART at TTL levels only. The weight is 8 grams.
ELT0020 — MAX-M8Q receiver
© Eltehs SIA 2023
