Frequency ranges and signals
Theoretical frequency ranges include:
L1 Band – signals:
- L1/E1/B1C (1575.420 MHz)
- G1 (1598.062–1605.375 MHz)
- B1I (1561.098 MHz)
L2 Band – signals:
- L2 (1227.600 MHz)
- G2 (1242.937–1248.625 MHz)
- L6/E6 (1278.750 MHz)
- B3 (1286.530 MHz)
L5 Band – signals:
- L5/E5a/B2a (1176.450 MHz)
- G3 (1202.025 MHz)
- E5b/B2b/B2I (1207.140 MHz)
Additionally, other frequency ranges are present in the antennas:
L1gps Band – only signals L1/E1/B1C (1575.420 MHz), without reception of G1 GLONASS and B1I Beidou.
L2b Band – signals:
- G3 (1202.025 MHz)
- E5b/B2b/B2I (1207.140 MHz)
- L2 (1227.600 MHz)
- G2 (1242.937–1248.625 MHz)
L5a Band – signals: L5/E5a/B2a (1176.450 MHz)
L2/L5 Band – L2+L5 signals
- L5/E5a/B2a (1176.450 MHz)
- G3 (1202.025 MHz)
- E5b/B2b/B2I (1207.140 MHz)
- L2 (1227.600 MHz)
- G2 (1242.937–1248.625 MHz)
- L6/E6 (1278.750 MHz)
- B3 (1286.530 MHz)
L Band – signals: SPARTN (1539.8125 MHz) and other commercial correction signals.
Antenna Mounts
Let's consider antennas by mounting type (in brackets - supported frequency ranges)
Magnetic with 3-5 meter cable:
- ELT0011 (L1gps)
- ELT0012 (L1/L2b)
- ELT0140 (L1/L5a)
- ELT0157 (L1/L2b)
- ELT0158 (L1/L2b)
- ELT0167 (L1/L2/L5)
Screw mount:
- ELT0012 (L1/L2b)
- ELT0121 (L1/L2b)
- ELT0121W (L1/L2b)
- ELT0140 (L1/L5a)
- ELT0158 (L1/L2b)
- ELT0168 (L1/L2b)
- ELT0170 (L/L1/L2/L5)
SMA connector:
- ELT0014 (L1/L2b)
- ELT0014W (L1/L2b)
- ELT0121 (L1/L2b)
- ELT0121W (L1/L2b)
- ELT0124 (L1)
- ELT0170 (L/L1/L2/L5)
- ELT0178 (L1/L5a)
Angular SMA mount:
- ELT0152 (L1/L2/L5)
Geodesic pole mount:
- ELT0123 (L1/L2/L5)
Hole mount:
- ELT0153 (L1/L2b)
Enclosure-less screw mount SMA:
Enclosure-less IPEX mount:
- ELT0182 (L1)
IPEX mount with tape:
Typically, magnetic and enclosure-less antennas can also be attached using double-sided tape.
Receivers and Antennas
L-Band
Of our antennas, only the lightweight ELT0170, which screws onto an SMA connector or can be mounted with screws, and the stationary ELT0123, which mounts on a geodetic pin, are capable of receiving signals in this band. The receiver for this range is the NEO-D9S.
L1gps
These antennas are suitable for NEO-M10S receivers when switching from Beidou to B1C and not using GLONASS. They also work for any other single-frequency receivers if only GPS and Galileo are being received. There are only two types of antennas: a magnetic one with a 3-meter cable and an SMA connector, ELT0011, and a caseless one with an IPEX connector, ELT0176.
L1
These antennas are suitable for any single-frequency receivers. ELT0124 screws onto an SMA connector, ELT0180 and ELT0181 are adhesive with double-sided tape, while ELT0182 is mounted with screws. All except ELT0124 are caseless with an IPEX connector.
L1/L2b
These antennas are for dual-frequency L1/L2 receivers, such as ZED-F9P-04, ZED-F9R, ZED-F9H, ZED-F9T-00.
- there are magnetic options: ELT0012, ELT0157, ELT0158
- screw-mounted options: ELT0012, ELT0121, ELT0121W, ELT0158, ELT0168
- screw-on SMA options: ELT0014, ELT0014W, ELT0121, ELT0121W
- option for screwing into a hole: ELT0153
All antennas come with an SMA connector.
L1/L5a
These antennas are for dual-frequency L1/L5 receivers, such as ZED-F9T-00, ZED-F9P-15, NEO-F9P-15, NEO-F10T. There are only two antennas. ELT0178 screws onto an SMA connector, and ELT0140 (also with an SMA connector) can be either screw-mounted or attached to magnets.
L1/L2/L5
These are multi-frequency antennas. They are used when different dual-frequency receivers (L1/L2 and L1/L5) need to be connected to one antenna, or when stationary mounting or a rare antenna type is required. There are various mounting options:
- magnetic ELT0167
- screw-mounted ELT0170
- screw-on SMA ELT0170
- angled mounting on SMA ELT0152
- geodetic pin mounting ELT0123
- caseless screw-mountable ELT0149, ELT0148
All antennas come with an SMA connector.
© Eltehs SIA 2024
