TCP Client Setup
If you write TCP in the mount point and password fields in the NTRIP service settings (either A or B), it will connect as a TCP client instead of an NTRIP client.
Thus, our equipment can act as both a TCP Server (see “Important Requirements”) and a TCP client.
RTCM3 Proposals
In the settings of all services, except for Main and File, there is a list of transmitted RTCM3 proposals. After the proposal number, you can specify the period (time in seconds between proposal transmissions). This is especially relevant for the caster.
Unicore Receiver
- Base coordinates: 1005 and 1006
- Antenna name: 1007 and 1033
- Ephemerides: 1019 (GPS), 1020 (Glonass), 1042 (Beidou), 1044 (QZSS), 1045 (Galileo FNAV), 1046 (Galileo INAV)
- Measurements MSM7: 1077 (GPS L1C/A L2Z L2C(M+L) L5Q), 1087 (Glonass R1C/A R2C/A), 1097 (Galileo E1C E6C E5Bq E5Aq), 1107 (SBAS), 1117 (QZSS L1C/A L2C(M+L) L5Q), 1127 (Beidou B1Ii B1Cp B2Ii B2Ap B2Bd B3Ii), 1137 (IRNSS)
Bynav Receiver
- Base coordinates: 1005 and 1006
- Antenna name: 1033
- Ephemerides: 1019 (GPS), 1020 (Glonass), 1042 (Beidou), 1044 (QZSS), 1046 (Galileo INAV), 1048 (IRNSS)
- Measurements MSM7: Measurements MSM7: 1077 (GPS L1C/A L2Z L5I), 1087 (Glonass R1C/A R2C/A), 1097 (Galileo E1B E5Ai E5Bi), 1117 (QZSS), 1127 (Beidou B1Ii B2Ii B2Ad B3Ii)
- Measurement offset information: 1230 (Glonass)
Septentrio Receiver
- Base coordinates: 1005 and 1006
- Antenna name: 1007 and 1033
- System Parameters: 1013
- Ephemerides: 1019 (GPS), 1020 (Glonass), 1042 (Beidou), 1044 (QZSS), 1045 (Galileo FNAV), 1046 (Galileo INAV)
- Measurements MSM7: 1077 (GPS L1C/A L1Z L2Z L2CL L5Q), 1087 (Glonass R1C/A R2C/A R2P), 1097 (Galileo E1C E5Aq E5Bq E5q E6C), 1117 (QZSS L2C(L) L5Q), 1127 (Beidou B1Ii B1Cp B2Ii B2Ap B2Bd B3Ii), 1137 (IRNSS)
- Measurement offset information: 1230 (Glonass)
u-blox receiver:
- Base coordinates: 1005
- Measurements MSM7: 1077 (GPS L1C/A, L2CL, L5Q), 1097 (Galileo E1C E5Aq E6B), 1127 (Beidou B1Cp B2Ap B3Ii)
